Well Pure 5-Stage Reverse Osmosis Purification System

Purify your drinking water with our Well Pure five-stage Reverse Osmosis purification system.

Tap water contains several hundred parts per million (ppm) of contaminants which are deemed to be safe however, over time, these contaminants will build up in your body damaging your health and increasing your toxic load.

Why put your health at risk when you can drink pure water?

Our purification system has five filters which remove even the smallest particles including viruses, parasites, bacteria, hormones (mostly Estrogen*) heavy metals, chemicals, and other dissolved substances, impurities are reduced to as little as 8 parts per million, only reverse osmosis can do this.

Monitor the quality of your drinking water via the onboard computer ppm display screen, install your system on your kitchen counter or under your sink.

The filters are easy for anyone to change without the need for tools or an expensive service call.

1st stage
The first stage hollow fibre filter removes larger contaminant particles and sediments such as sand, silt, dirt, and rust. The filter body is translucent, after just a few days you will see it starting to change colour as it traps these impurities.

2nd stage
This filter contains granular activated carbon which removes chlorine, fluoride, trihalomethanes and other similar chemicals. If you are using a filter jug or plumbed filter system without reverse osmosis, this is as pure as your water gets, there are still a lot of impurities to be removed!

3rd stage
This filter contains carbon block which removes smaller chemical particles, heavy metals, and odours. The first three stages are designed to protect the reverse osmosis membrane in the fourth stage from getting blocked by all these contaminants.

 4th stage
Reverse Osmosis filters contain a membrane which is designed so that only certain sized particles can pass through, think of it as a very fine sieve. The membrane in our reverse osmosis filter has a pore size of just 0.0001um and only permits water molecules to pass though which is the key to water purification. Unlike regular filter systems, reverse osmosis filters do not let contaminants through when the filtration surface is full, if the reverse osmosis membrane is blocked, nothing can pass so this protects you from drinking filtered water that you think is safe! Regular filter systems trap most contaminants when the filters are new but as more contaminated water passes over the surfaces they become full so less and less can be trapped, this is why these systems do not have onboard ppm monitoring, you would see the number rising (and hence the number of contaminants getting past the filters) after just a few days.

5th stage
Here you have options to enhance your purified water to match your health needs. The standard fifth stage filter contains granular activated carbon, see our website for other fifth stage filter options.
Purified water is stored in an onboard tank ready to be served via the 5th stage filter. Well Pure systems are easy to install by anyone with basic DIY skills, a fitting kit and instructions are included. Installation requires a UK three pin socket power supply. Under the counter installation requires a tap on the counter (not supplied), on the counter installation, water can be dispensed via the onboard faucet. In either installation, a supply can also be directed to an American style refrigerator with an ice maker/chilled water dispenser. Use your purified water for cooking and beverages.